Mobile Clutches

FEATURES

SOLID FORGED ROTOR
A one piece solid forged rotor means no chance of internal parts separation. Our rotors also have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque.

DIFFERENT COIL VOLTAGES AVAILABLE
Although 12 volt is the most common, 24 volts can also be made available. Depending upon the quantity, other specialty voltages can be made.

HIGH TEMPERATURE, LONGER LIFE GREASE
All models include our special long life grease which has shown a significant improvement in life over other standard high temp greases.

E-COATING
Where possible, all parts in the clutch are e-coated to give maximum corrosion protection.

HIGH TEMPERATURE EPOXY COIL
To help prevent failure from both vibration and outside contaminants, all coils are sealed in the coil shell with a high temperature epoxy coating.

FORGED MACHINED PULLEY
All models in this section use a heavy duty machined pulley. A stronger pulley resists damage due to abusive environments.

Click on column heading to sort table by category

Ogura
P/N
Static
Torque
(ft-lbs)
max
RPM
Bore
(inch)
Volts/
Watts
Output
Pulley (P)
Hub (H)
Other (O)
Ref.
Pitch
Dia.
(inch)
#
Grooves
Wgt
(lbs)
PIC PDF DXF
509191 100 3600 *Taper 12/60 P 7.37 2/A 11.00 picture icon Download PDF DXF
80002327 1000 2500 1.75 12/100 H 3.75 UnivMt 0.00 picture icon Download PDF DXF
80002328 1000 2500 1.75 24/100 H 3.75 UnivMt 0.00 picture icon Download PDF DXF
80004332 1000 2500 *Spline 12/100 H 3.75 UnivMt 0.00 picture icon Download PDF DXF
80004333 1000 2500 1.25 12/100 H 3.75 UnivMt 0.00 picture icon Download PDF DXF
80005159 1000 2500 Spline 24/100 H 0.00 UnivMt 0.00 picture icon Download PDF DXF
80005158 1000 2500 Spline 12/100 H 0.00 UnivMt 0.00 picture icon Download PDF DXF
80005181 1000 2500 Spline 24/100 H 0.00 UnivMt 0.00 picture icon Download PDF DXF
80005180 1000 2500 Spline 12/100 H 0.00 UnivMt 0.00 picture icon Download PDF DXF
80004213 1500 1800 *Spline 12/170 H 4.75 UnivMt 0.00 picture icon Download PDF DXF
80004214 1500 1800 2.17 24/50 H 0.00 UnivMt 0.00 picture icon Download PDF DXF
523543 175 3600 24mm 12/50 H 7.41 UnivMt 15.00 picture icon Download PDF DXF
509190 175 3600 *Taper 12/50 H 7.41 UnivMt 15.00 picture icon Download PDF DXF
80001708 200 3500 1 12/66 P 8.20 2/B 25.00 picture icon Download PDF DXF
80001709 200 3500 1 24/66 P 8.20 2/B 25.00 picture icon Download PDF DXF
80002657 200 3500 1 12/66 H 0.00 UnivMt 25.00 picture icon Download PDF DXF
80002658 200 3500 1 24/66 H 3.12 UnivMt 25.00 picture icon Download PDF DXF
80002712 200 3500 1 12/66 H 3.12 UnivMt 25.00 picture icon Download PDF DXF
80003581 200 3500 1 24/66 H 3.12 UnivMt 25.00 picture icon Download PDF DXF
80003931 200 3500 *Spline 12/66 H 3.12 UnivMt 25.00 picture icon Download PDF DXF
80004270 200 3500 *Spline 24/66 H 3.12 UnivMt 0.00 picture icon Download PDF DXF
80004265 200 3500 *Taper 12/66 H 3.12 UnivMt 0.00 picture icon Download PDF DXF
80002310 400 3000 1.75 24/68 H 3.75 UnivMt 0.00 picture icon Download PDF DXF
80002309 400 3000 1.75 12/68 H 3.75 UnivMt 60.00 picture icon Download PDF DXF
80004243 400 3000 *Spline 12/68 H 3.75 UnivMt 60.00 picture icon Download PDF DXF
80004331 400 3000 1.25 12/68 H 3.75 UnivMt 60.00 picture icon Download PDF DXF
80004459 400 3000 Spline 24/68 H 0.00 UnivMt 0.00 picture icon Download PDF DXF
503272 58 3600 *Taper 12/46 P 5.00 2/A 6.00 picture icon Download PDF DXF
521792 58 3600 0.625 12/45 P 5.00 2/A 6.00 picture icon Download PDF DXF
80005215 700 2500 1.75 24/85 H 0.00 UnivMt 0.00 picture icon Download PDF DXF
502286 75 3600 0.625 12/40 P 6.00 2/A 7.00 picture icon Download PDF DXF
517166 75 3600 0.75 12/40 P 6.00 2/A 7.00 picture icon Download PDF DXF
513297 75 3600 0.75 12/44 P 7.00 1/A 8.00 picture icon Download PDF DXF
512368 75 3600 16.5mm 12/44 P 7.00 1/A 9.00 picture icon Download PDF DXF
520886 75 3600 16.5mm 12/44 P 7.00 1/A 9.00 picture icon Download PDF DXF
520888 75 3600 16.5mm 12/44 P 7.00 2/A 9.00 picture icon Download PDF DXF
520887 75 3600 20mm 12/44 P 7.00 1/A 9.00 picture icon Download PDF DXF
520889 75 3600 20mm 12/44 P 7.00 2/A 9.00 picture icon Download PDF DXF
535104 75 3600 24mm 24/47 P 7.00 1/A 9.00 picture icon Download PDF DXF
522850 75 3600 24mm 12/47 P 7.00 2/A 9.00 picture icon Download PDF DXF
501999 75 3600 *Taper 12/44 P 7.00 2/A 11.00 picture icon Download PDF DXF
522146 75 3600 0.625 12/44 P 7.00 2/A 11.00 picture icon Download PDF DXF
526531 75 3600 *Taper 12/48 P 6.00 6K Poly-V 9.00 picture icon Download PDF DXF
502001 75 3600 *Taper 12/44 P 7.00 1/B 9.00 picture icon Download PDF DXF
521680 75 3600 *Taper 12/48 O 5.80 6K Poly-V 0.00 picture icon Download PDF DXF
520441 75 3600 *Taper 12/44 P 7.30 2/A 11.00 picture icon Download PDF DXF
521491 75 3600 24mm 24/45.6 P 6.99 1/A 0.00 picture icon Download PDF DXF
522886 75 3600 24mm 24/45.6 H 7.00 2A 0.00 picture icon Download PDF DXF
534818 75 3600 *Taper 12/47 H 5.28 6K Poly-V 0.00 picture icon Download PDF DXF
501075 75 3600 *Taper 24/45.6 P 6.99 2/A 0.00 picture icon Download PDF DXF
501076 75 3600 *Taper 24/30 P 5.99 2/A 0.00 picture icon Download PDF DXF
332639 75 3600 *Taper 12/40 P 5.98 2/A 0.00 picture icon Download PDF DXF
332334 75 3600 *Taper 12/43.3 P 7.00 2/A 0.00 picture icon Download PDF DXF
536152 75 3600 0.75 12/40 P 5.99 2/A 0.00 picture icon Download PDF DXF
536153 75 3600 0.75 24/30.3 P 5.99 2/A 0.00 picture icon Download PDF DXF
515376 90 3600 *Taper 12/47 P 5.20 8K Poly-V 8.00 picture icon Download PDF DXF
512010 90 3600 *Taper 12/47 P 6.00 2/A 7.00 picture icon Download PDF DXF
520226 90 3600 *Taper 12/47 P 5.70 6K Poly-V 9.00 picture icon Download PDF DXF
511645 90 3600 0.75 12/47 P 6.00 2/A 7.00 picture icon Download PDF DXF
526299 90 3600 *Taper 12/47 P 5.90 8K Poly-V 9.00 picture icon Download PDF DXF
512606 95 3600 *Taper 12/47 P 7.00 2/A 8.00 picture icon Download PDF DXF
517162 95 3600 0.75 12/47 P 7.00 2/A 8.00 picture icon Download PDF DXF
511646 95 3600 0.75 12/47 P 7.00 2/A 9.00 picture icon Download PDF DXF

*Taper is standard automotive 1" : 4" ratio. Gauge line diameter is .841." Weight is approximate.

In non-taper bore clutches, square keys are used. Actual keyway height shown is less.