AMB Electromagnetic Brake
(Torque Range: 2~70in-lbs / 0.25~8Nm)

Brake designed for general industrial application units feature zero backlash, armature hub, and field assemblies that can accommodate bearings for additional shaft support.

VB Electromagnetic Brake
(Torque Range: 5~44ft-lbs / 7~60Nm)

Brake designed for general industrial applications. Units come standard with zero backlash armature. Units are normally produced in a high torque version but a lower torque is also available which reduces the overall length of the clutch by 15%. Options for this unit include an automatic air gap that adjusts as the clutch wears, a quiet armature option that reduces clutch engagement noise for application in hospitals or offices and a 1 piece designed option that simplifies mounting.

B Electromagnetic Brake
(Torque Range: 8~150ft-lbs / 11~203Nm)

Brake designed for general industrial use. Brakes are dimensionally interchangeable with popular competitors' units. Brakes use stainless steel hubs to help reduce residual magnetism and reduce the chance of corrosion. Patented automatic adjustment for wear allows consistent stop times over the life of the unit. Armature design allows for excellent heat dissipation. Screw terminals come with optional terminal cover for hard wire connections.

TMB Electromagnetic Brake
(Torque Range: 4~147ft-lbs / 6~200Nm)

Brake is designed for general industrial use. Low inertia zero backlash armature can be bolted to your hub. Brake can be supplied with internal or external hub depending upon overall length restrictions.

MCNB Electromagnetic Spring-Applied Brake
(Torque Range: 1.8~8.9in-lbs / 0.2~1Nm)

Small spring applied brake available with either D hub designs or set screws. Standard voltages are 24 and 45 but other voltage options are available. Units are designed to give 100% rated torque right out of the box. No burnishings required.

SNB Electromagnetic Spring-Applied Brake
(Torque Range: 0.7~74ft-lbs / 1~100Nm)

Spring applied holding brake designed for general industrial applications. Unit is used for both stopping and/or holding. Very thin brake profile provides a compact package. Braking force is produced via springs so basic fluctuations in voltage and temperature have no effect on the brake. Long life friction material allows for many trouble free cycles. Standard voltages are 24 and 90 volts. Other voltage options are available.

MNB Electromagnetic Spring-Applied Brake
(Torque Range: 1.5~590ft-lbs / 2~800Nm)

Spring applied brake used for industrial applications. Units are designed for stopping and/or holding. MNB units 1.2 and higher have adjustable torque feature. Torque of the brake can be fine tuned by you to fit your exact needs. Bolt holes for manual bolt release included on standard units. Optional manual lever releases available by special order.

PMB Electromagnetic/Permanent-Magnet Brake *
(Torque Range: 3.5~265in-lbs / 0.4~30Nm)

Permanent magnet brake designed for industrial and mobile applications. Brake force is produced via magnets which reduces both size and weight of brake versus spring applied brakes. Armature is mounted via springs which eliminates backlash. Standard brakes can accommodate temperatures up to 140deg C. Brakes can be tuned to provide a controlled stop. Output assemblies easily modified to fit your application.

HB Electromagnetic Hysteresis Brake
(Torque Range: 0.4~8.9in-lbs / 0.05~1Nm)

Hysteresis brake for industrial application. Torque is independent of slip speed and can be easily controlled by varying the current. Since there is no frictional contact between the magnets, the units have an extremely wide torque range and are ideally suited for testing machinery and/or application that are required to produce consistent and smooth torque over a wide range.

MDB-N Electromagnetic Multiple-Disk Brake
(Torque Range: 13~826ft-lbs / 18~1120Nm)

Multiple disk brakes designed for high torque small space environment. Multiple disks produce high torque in a compact design.

MWB Electromagnetic Multiple-Disk Brake
(Torque Range: 18~2360ft-lbs / 24~3200Nm)

Multiple disk brake designed for high torque small environment. Brakes are designed to work in oil. Multiple disks produce high torque in a compact design. Special oil path grooves in the friction plastes allow for quick engagement and response time. Because brakes are used in oil lubrication they have excellent heat dissipation.

OPB-N Electromagnetic Mag-Particle Brake
(Torque Range: 4.4~71in-lbs / 0.5~8Nm)

Magnetic particle brake designed for industrial applications requiring fast response time and a stable torque. Units can also be set for continuous slip which makes them ideal for tension applications. Since voltage to torque is linear, output torque can be easily controlled. Since torque is also transmitted via internal particles, unit life is extremely long.

PB Electromagnetic Mag-Particle Brake
(Torque Range: 8.8~144ft-lbs / 12~195Nm)

Magnetic particle brake designed for industrial applications requiring fast response time and a stable torque. Units can also be set for continuous slip which makes them ideal for tension applications. Since voltage to torque is linear, output torque can be easily controlled. Since torque is also transmitted via internal particles, unit life is extremely long.